Curtin Corrosion Centre

03 December 2019 | Laura Machuca-Suarez

Aggressive corrosion of steel by a thermophilic microbial consortium in the presence and absence of sand.

New peer-review article on microbiologically influenced corrosion under deposits.

10 October 2019 | Mariano Iannuzzi

Crevice Corrosion

New book chapter on crevice corrosion fundamentals (pre-print)

08 September 2019 | Mobin Salasi

Low-Stress Abrasion-Corrosion of High-Cr White Cast Iron

New peer-reviewed article on abrasion corrosion of high-Cr white case iron.

Areas of expertise

Mechanically Assisted Corrosion

Mechanically assisted corrosion groups the most dangerous and costly forms of corrosion. Enter to discover how the Curtin Corrosion Centre studies corrosion facilitated or initiated by mechanical processes.

Areas of expertise

Localized Corrosion

Localized corrosion can lead the an extremely fast penetration rate, resulting in leakages and loss of containment. In this page you will discover our research and approaches to mitigate localized corrosion.

Areas of expertise

Microbiologically influenced Corrosion

Microbiologically influenced corrosion is a truly multidisciplinary field of research. This page describes Curtin Corrosion Centre leading MIC activities.

Areas of expertise

Acid Gas Corrosion

Dissolved acid gases such as carbon dioxide and hydrogen sulfide can lead to complex corrosion behaviour. In this page, you will learn more about acid gas corrosion research at the Curtin Corrosion Centre.

Areas of expertise

Corrosion Protection

The Curtin Corrosion Centre conducts state-of-the-art research on corrosion inhibition, coatings, and electrochemical protection. Here you will learn more about corrosion protection and our approach to mitigate corrosion risks.

Areas of expertise

Atmospheric Corrosion

There is more to it than rust. Atmospheric corrosion is costly and can lead to catastrophic failures. Enter to discover how the Curtin Corrosion Centre helps mitigate the problem.